DVDO-Xtend-USBC-USB-EUWB-1 is a USB extender that can transmit USB 3.2 Gen 1 signals up to 100m/328ft via a single CAT6a cable.
The EU/UK 2-Gang wall plate transmitter includes one USB-C host port as well one USB-C and two USB-A device ports. The receiver includes two USB-C and two USB-A device ports.
It can be used for long distance signal transmission between USB sources such as laptops and desktop computers and USB devices such as webcams, PTZ cameras, keyboards and mice, microphones, speakerphones, printers, scanners, touch panel displays, etc…
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
- EU/UK 2-Gang wall plate Tx and box Rx
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Wall plate Tx includes 1 x USB-C host port (5V@1.5A) + 1 x USB-C and 2 x USB-A device ports (5V@1.5A)
- Rx includes 2 x USB-C (1 x 5V@1A & 1 x 5V@1.5A) and 2 x USB-A device ports (1 x 5V@1A & 1 x 5V@1.5A)
- RS-232 pass-through
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industry camera use
- Bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads or software required
DVDO-Xtend-USBC-USB-EUWB-1 is a USB extender that can transmit USB 3.2 Gen 1 signals up to 100m/328ft via a single CAT6a cable.
The EU/UK 2-Gang wall plate transmitter includes one USB-C host port as well one USB-C and two USB-A device ports. The receiver includes two USB-C and two USB-A device ports.
It can be used for long distance signal transmission between USB sources such as laptops and desktop computers and USB devices such as webcams, PTZ cameras, keyboards and mice, microphones, speakerphones, printers, scanners, touch panel displays, etc…
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
- EU/UK 2-Gang wall plate Tx and box Rx
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Wall plate Tx includes 1 x USB-C host port (5V@1.5A) + 1 x USB-C and 2 x USB-A device ports (5V@1.5A)
- Rx includes 2 x USB-C (1 x 5V@1A & 1 x 5V@1.5A) and 2 x USB-A device ports (1 x 5V@1A & 1 x 5V@1.5A)
- RS-232 pass-through
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industry camera use
- Bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads or software required