DVDO-Xtend-USBC-USB-WW-1 is a USB extender that can transmit USB 3.2 Gen 1 signals up to 100m/328ft via a single CAT6a cable.
The wall plate transmitter includes one USB-C and one USB-B host ports as well two USB-A device ports. The wall plate receiver includes one USB-C and three USB-A device ports.
It can be used for long distance signal transmission between USB sources such as laptops and desktop computers and USB devices such as webcams, PTZ cameras, keyboards and mice, microphones, speakerphones, printers, scanners, touch panel displays, etc…
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Wall plate Tx features 1 x USB-B + 1 x USB-C selectable input ports and 2 x USB-A device ports
- Auto switching and manual switching modes
- Wall plate Rx features 1 x USB-C and 3 x USB-A output ports (2 x 5V@1A and 2 x 5V@1.5A)
- RS-232 pass-through and API control
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industry camera use
- Bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads or software required
DVDO-Xtend-USBC-USB-WW-1 is a USB extender that can transmit USB 3.2 Gen 1 signals up to 100m/328ft via a single CAT6a cable.
The wall plate transmitter includes one USB-C and one USB-B host ports as well two USB-A device ports. The wall plate receiver includes one USB-C and three USB-A device ports.
It can be used for long distance signal transmission between USB sources such as laptops and desktop computers and USB devices such as webcams, PTZ cameras, keyboards and mice, microphones, speakerphones, printers, scanners, touch panel displays, etc…
It supports bi-directional 24V PoC (Power over Cable), allowing the power supply to be connected to either the transmitter or the receiver.
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Wall plate Tx features 1 x USB-B + 1 x USB-C selectable input ports and 2 x USB-A device ports
- Auto switching and manual switching modes
- Wall plate Rx features 1 x USB-C and 3 x USB-A output ports (2 x 5V@1A and 2 x 5V@1.5A)
- RS-232 pass-through and API control
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industry camera use
- Bi-directional 24V PoC (Power over Cable)
- Plug-and-play with no drivers, downloads or software required