DVDO-Xtend-2USBC-2HDMI-100 is a 2-host HDBaseT extender that can transmit USB 3.2 Gen 1 or USB 2.0 signals up to 328ft/100m via a single CAT6a cable and display them on two HDMI displays.
The transmitter includes 2 selectable (auto or manual switching) USB-C Host ports and 1 USB-C + 2 USB-A Device ports.
The receiver includes 2 HDMI outputs, 1 USB-C + 2 USB-A Device ports and a balanced / unbalanced analog audio output.
The two HDMI outputs can be either mirrored outputs or they can display different content using screen extend (from one host at a time).
DVDO-Xtend-2USBC-2HDMI-100 supports RS-232 pass-through and bi-directional 24V PoC.
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Built-in DisplayLink technology for video over USB on dual HDMI outputs, with resolutions up to 4K@60Hz
- Tx supports auto and manual switching selectable via switch button or API commands
- Rx supports audio de-embedding to balanced / unbalanced analog output
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industrial camera use
- RS-232 pass-through and API control
- Bi-directional 24V PoC
DVDO-Xtend-2USBC-2HDMI-100 is a 2-host HDBaseT extender that can transmit USB 3.2 Gen 1 or USB 2.0 signals up to 328ft/100m via a single CAT6a cable and display them on two HDMI displays.
The transmitter includes 2 selectable (auto or manual switching) USB-C Host ports and 1 USB-C + 2 USB-A Device ports.
The receiver includes 2 HDMI outputs, 1 USB-C + 2 USB-A Device ports and a balanced / unbalanced analog audio output.
The two HDMI outputs can be either mirrored outputs or they can display different content using screen extend (from one host at a time).
DVDO-Xtend-2USBC-2HDMI-100 supports RS-232 pass-through and bi-directional 24V PoC.
- Extension of USB 3.2 Gen 1 up to 100m/328ft via CAT6a cable
- USB 3.2 Gen 1 connectivity with data transfer rate up to 5Gbps
- Backwards compatible with USB 2.0 and 1.1
- Hardware acceleration for isochronous and bulk transfer
- Built-in DisplayLink technology for video over USB on dual HDMI outputs, with resolutions up to 4K@60Hz
- Tx supports auto and manual switching selectable via switch button or API commands
- Rx supports audio de-embedding to balanced / unbalanced analog output
- Firmware upgrade via USB-C service port
- FSYNC GPIO pass-through for industrial camera use
- RS-232 pass-through and API control
- Bi-directional 24V PoC